Yamaha DSP5D Owner's Manual - Page 258
OUTPUT DCA/GROUP function, DCA GROUP ASSIGN screen
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
OUTPUT DCA/GROUP function • SAMPLE The delay time is shown as a number of samples. If you change the sampling frequency at which the PM5D operates, the number of samples will change accordingly. • msec (milliseconds) The delay time is shown in units of milliseconds. If this button is on, the boxes above and below the delay time knob (3) will show the same values. • BEAT The delay time is shown in units relative to the note length (considered as 1.0) specified by the tempo (BPM) and note value (NOTE). To specify the tempo, you can either use the / buttons located immediately below the BEAT button, or repeatedly tap (click) the TAP button, or repeatedly click a User Defined key that is assigned to [TAP TEMPO]-[CURRENT PAGE]. • FRAME The delay time is shown in units of frames. Use the six buttons located below the FRAME button to select the number of frames per second. Hint • If you change the DELAY SCALE setting of the OUTPUT DELAY function screen, the DELAY SCALE setting of the INPUT DELAY function screen will change in tandem. • The TAP button of the OUTPUT DELAY function is independent from the TAP TEMPO button of the internal effect. • The number of frames per second is linked with the TIME CODE SETUP field in the EVENT LIST screen (SCENE function). OUTPUT DCA/GROUP function DCA GROUP ASSIGN screen Here you can specify the output channels that will be assigned to DCA groups 7/8. You can use DCA faders 7/8 to uniformly adjust the levels of output channels belonging to the same DCA group. DCA GROUP ASSIGN 2 3 4 5 B GANG This button specifies whether the delay parameters will be linked for adjacent odd-numbered/even-numbered channels. This can be specified independently of pairing. If the GANG button is turned on for channels of differing delay times, turning the delay time knob (3) will change the delay times of both channels while maintaining the difference in their delay time. C Delay time knob This knob sets the delay time of each channel. The box below the knob shows the delay time in the units you selected in (1). The box above the knob always shows the delay time in millisecond units. D DELAY ON/OFF This button switches delay on/off. This is linked for paired channels. E Channel This is the number and name of the channel you are editing. Two paired channels are indicated by a heart symbol displayed between them. You can click this symbol to enable/disable pairing. 12 3 A DCA group This is the number of the DCA group. The number corresponding to the grid where the cursor is located is highlighted. B Name This is the name of the DCA group. You can also click this area to edit the name. C Grid This grid lets you assign output channels (horizontal rows) to DCA groups (vertical columns). Currentlypatched grids are indicated by a symbol. Move the cursor to the desired grid and press the [ENTER] key (or click) to set/disable the assignment. Hint • You can also assign an output channel to both DCA groups for multiple DCA control. • DCA groups 1-6 are for input channels only, but DCA groups 7/8 can be used with both input channels and output channels. DCA groups 7/8 allow you to use both types of channel in the identically-numbered group. 258 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section