Yamaha DSP5D Owner's Manual - Page 199
Dme Control Screen, Setup, Cross Over, Long Delay, Short Delay, Matrix, Slot Output
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Information shown in the display Function menu Global functions Output functions D LOCATE POINT These buttons correspond to each locate point. Twenty locate points can be specified for MMC-compatible devices, and another twenty locate points can be separately specified for RS422-compatible devices. When you click buttons 1-20, an MMC command or RS422 command for moving to that locate point will be transmitted. E Time code This field indicates the time code that is specified for each locate point. To edit the time code, click the button located at the left to open the MMC/RS422 LOCATE POINT window, and specify the new time code in hours/minutes/seconds/frames. (In the case of DENON format, use track/minute/second/frame units to specify the value.) You can also use the CAPTURE button located at the right to capture the time code being received by the PM5D. F CAPTURE This button captures the time code currently being received by the PM5D, and inputs it in the time code field. In the case of MMC, the time code source, frame rate, and offset time can be specified in the EVENT LIST screen (SCENE function). (➥ p.177) In the case of RS422, the time data at that moment for the external device being controlled will be captured. DME CONTROL screen Here you can remotely control various functions of a Yamaha DME series digital mixing engine. Hint As of this writing (April 2007), this function can be used with the DME series models DME64N, DME24N, DME8i-C, DME8o-C, DME4io-C, DME8i-ES, DME8o-ES and DME4ioES. (This function cannot be used with the DME32.) 1 23 4 5 6 7 A Component type selection area Here you can select the type of DME series component that you want to control from the PM5D. When you click the / buttons at the left and right to select the type of component, the display in the central area of the screen will change accordingly. The following types of component can be selected. • SETUP Select the port connecting the PM5D and the DME series unit, and initiate or terminate communication. • GEQ Control the DME series unit's graphic EQ from the PM5D. • PEQ Control the DME series unit's parametric EQ from the PM5D. • CROSS OVER An internal signal within the DME series unit is divided into six bands, and the output level, filter slope and type, and cutoff frequency etc. can be controlled for each band. This screen also lets you specify the crossover frequency at which the bands are divided. • LONG DELAY • SHORT DELAY Control the long delay and short delay functions of the DME series unit from the PM5D. • MATRIX Specify the level of the signals sent from a specific input of the DME series unit to all outputs, or from all inputs to a specific output. • SLOT OUTPUT For each slot of the DME series unit, specify the output level, delay time, and phase setting of each port. B Component selection area From the type of component you selected in 1, select the component that you want to control. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 199