Yamaha DSP5D Owner's Manual - Page 144
Basic settings for surround buses, If the MIX MIX MASTER] key is
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
18 Surround pan ❏ If the MIX section [MIX MASTER] key is on A Output level The encoders adjust the output level of each surround channel. 1 Basic settings for surround buses Here's how to choose either 3-1ch, 5.1ch, or 6.1ch as the surround mode, and make settings for the MIX buses you will use as surround buses. 1 According to the surround mode you intend to use, connect an appropriate playback system to MIX OUT jacks 1-8 or MIX OUT jacks 9-16. 2 In the DISPLAY ACCESS section, repeatedly press the [MATRIX/ST] key to access the SURR SETUP screen. In order to use a surround mode, you will first choose a surround mode, and then specify the MIX buses that will be the surround output destinations. SURR SETUP SURROUND BUS ALLOCATION area SURROUND MODE area Bus assign area Click the OK button to enable the surround mode you selected. For example if you switch to 6.1ch mode, the screen display will change as follows. SURR SETUP 3 Click a button in the SURROUND MODE area to select the desired surround mode. When you click a button a window will appear, asking you to confirm that you want to switch the surround mode. 4 In the SURROUND BUS ALLOCATION area, press the MIX 1-8 button or the MIX 9-16 button to select the MIX buses you want to use as surround buses. You can select either MIX buses 1-8 or MIX buses 9- 16. When you click a button a window will appear, asking you to confirm that you want to change the MIX bus allocation. When you click the OK button, the selected MIX buses will be allocated as surround buses, and will be assigned to surround channels according to the current surround mode. 5 If you want to change the surround channel assignments, click the / buttons at the left and right of each field in the bus assign area, and press the [ENTER] key (or click within the box) to confirm the setting. When the setting is confirmed, the previously-selected bus and the newly-assigned bus will be exchanged. Hint You can initialize the surround channel assignments by clicking the INIT button located at the right of the bus assign area. 144 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section