Yamaha DSP5D Owner's Manual - Page 274
CH JOB (Channel job) screen
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
OUTPUT VIEW function CH JOB (Channel job) screen 4 In this screen you can copy the desired parameter(s) from the selected output channel into a memory buffer, and 7 paste the same type of channel (you may select more than 8 one paste-destination). CH JOB 5 6 1 2 3 A JOB SELECT • COPY The copy-source channel will remain; its parameters will be copied to another channel. Note You cannot turn off the COPY button. B CAPTURE When you click this button, the settings of the currently selected channel will be copied to a temporary memory buffer. If the corresponding MIX/MATRIX channel is paired (or if a STEREO A/B channel is selected), a heart symbol is displayed at the right. C BUFFERED CH (Channel in the buffer) This shows the channel that is currently copied into buffer memory. Note • The same buffer memory is used to copy channel settings for both input channels and output channels. • If input channel settings have been copied to the buffer memory, a message of "TYPE CONFLICT!" is displayed below, and you cannot paste to an output channel. • The contents of the buffer memory are erased when the PM5D is powered-off. D EXECUTE When you click this button, the specified parameters will be copied from buffer memory to the specified paste-destination channel. If an input channel is copied to buffer memory, or if no paste-destination has been specified, this is grayed-out and the Paste operation is unavailable. E PARAMETER SELECT Here you can select the parameter(s) that will be pasted. You can select the following parameters. ALL EQ COMP DELAY FADER ON BAL INSERT TO MTRX DCA MUTE LCR WITHOUT MIX SEND/ WITH MIX SEND All parameters EQ function settings COMP function settings DELAY function settings Fader level CH [ON] key on/off status Balance settings Insert on/off status and insert point Send level to the desired MATRIX bus(es) Associated DCA group Associated mute group LCR screen settings Selects whether the send level sent from input channels to the selected MIX bus will be included (WITH...) or will not be included (WITHOUT...) in the pasted data. If the TO MTRX button is on, you can use the MATRIX buttons (1-8) to select the applicable MATRIX buses. 274 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/274.png)