Yamaha DSP5D Owner's Manual - Page 229
OUTPUT PORT ATT (Output port attenuation) screen, DITHER screen, DISPLAY MODE, ø phase
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Information shown in the display OUTPUT PORT ATT (Output port attenuation) screen In this screen you can specify the amount of attenuation for each output channel and for each output channel of an I/O card. OUTPUT PORT ATT DITHER screen In this screen you can turn dithering on/off and specify the bit depth for dithering. These settings are made individually for each digital output jack and each output channel of the digital I/O cards. DITHER Function menu Global functions Output functions Input functions Appendices 1 23 A DISPLAY MODE Select the channels that will appear in the display, from the following choices. • OUTPUT The screen will show the amount of attenuation for output channels (MIX channels 1-24, MATRIX channels 1-8, STEREO A L/R channels, STEREO B L/R channels), CUE L/R channels, MONITOR L/R/C channels, and 2TR OUT DIGITAL 1-3 L/R channels. • SLOT 1-4 The screen will show the amount of attenuation for each output channel of the I/O cards installed in slots 1-4. B ø (phase) If this button is on, the phase of the output port will be reversed. C ATT (Attenuation) Adjusts the amount of attenuation for each channel. Move the cursor to the box, and turn the [DATA] encoder to adjust the value in a range of -9 to 0 dB. A Digital output jack dither settings Specify the number of bits (16, 20, 24 bits) used when dither- ing the output signals from 2TR DIGITAL OUT jacks 1-3. If you select OFF, dithering will not be performed. 1 2 3 B Slots 1-4 This area shows the type of digital I/O card installed in each slot. C Digital I/O card dither settings For each output channel of the digital I/O cards installed in the slots, specify the number of bits used when dithering. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 229