Yamaha DSP5D Owner's Manual - Page 242
OUTPUT SOLO SAFE, Level meter, MONITOR / CUE DELAY, CUE LEVEL, CUE OUT, MON/CUE function
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
MON/CUE function 8 9 H OUTPUT SOLO SAFE Here you can specify output channels that will be excluded from Solo operations. (You can specify more than one.) The buttons correspond to the following output channels. MIX 1-24 MATRIX 1-8 STEREO A/B SET ALL CLEAR ALL MIX channels 1-24 MATRIX channels 1-8 STEREO A/B channels Sets all output channels to the Solo Safe condition Defeats the Solo Safe setting for all output channels Hint Solo Safe settings and Cue on/off operations are linked for paired channels. Solo Safe operations can be performed independently of the scene memory. K J L I Level meter This is a peak level meter that indicates the level of the signals output from the CUE OUT jacks. You can select the level detection point to be immediately befor the delay that is provided on the MONITOR/CUE bus output (when the PRE DELAY button is on), or immediately after the delay (when the POST DELAY button is on). J MONITOR / CUE DELAY Here you can make settings for the delay function provided on the MONITOR/CUE bus output. Use the knob to specify the delay time (0-1000 msec), and use the DELAY button to switch the delay on/off. In general, this is linked with the MONITOR/CUE DELAY setting in the MONITOR screen. However, the difference is that in this screen, turning the AUTO BYPASS button on lets you automatically bypass the delay when you perform the Cue any input channels. K CUE LEVEL The level of the signal sent from the CUE OUT jacks is set by the level (digital) you adjust here together with the level (analog) adjusted by the CUE [LEVEL] knob on the top panel of the PM5D. L CUE OUT Switches the cue output on/off. 242 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section