Yamaha DSP5D Owner's Manual - Page 205
Ddca Mute Target Emeter Fpanel Operation, Follow Input Layer, Alternative
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Information shown in the display Function menu Global functions Output functions D DCA MUTE TARGET This specifies whether the DCA [MUTE] key will mute the send to the MIX bus when the send-source to the MIX bus is PRE FADER. If you specify "POST ONLY," the PRE FADER signal will not be muted. If you specify "PRE & POST," it will be muted regardless of the send-source position. E METER SECTION Here you can set the following meter-related options. • FOLLOW INPUT LAYER This option lets you specify how the [CH 1-24]/[CH 25-48] keys (INPUT channel strip) and [STIN 1-4]/ [FXRTN 1-4] keys will select the layer that is shown by the meters in the center of the panel and the meters in the upper right of the panel. Click the / buttons at left and right to make your choice. OFF Operating the [CH 1-24]/[CH 25-48] keys will not affect the content shown by the meters in the center of the panel. Pressing the [STIN 1-4]/ [FXRTN 1-4] keys will not affect the content shown by the meters in the upper right of the panel. SAME When you press the [CH 1-24] or [CH 25-48] key, the corresponding layer will be shown by the meters in the center of the panel (if an input channel is selected in the meter section). When you press the [STIN 1-4] or [FXRTN 1-4] key, the corresponding layer will be shown by the meters in the upper right of the panel. ALTERNATIVE . . . When you press the [CH 1-24] or [CH 25-48] key, the opposite layer will be shown by the meters in the center of the panel (if an input channel is selected in the meter section). When you press the [STIN 1-4] or [FXRTN 1-4] key, the opposite layer will be shown by the meters in the upper right of the panel. Note • If this is set to SAME or ALTERNATIVE, the meters in the center of the panel and the meters in the upper right can be switched independently. • If the selected layer is switched from the panel, the layer shown by the meters will also change. However if you switch the METER SECTION field in the constantly-displayed area in the upper part of the screen, the layer selected on the panel will not change. • FOLLOW MIX MASTER MODE If this button is on, pressing the MIX section [MIX MASTER] key will cause the meters in the center of the panel and the meters in the upper right of the panel to show the MIX/MATRIX channel levels. Press the MIX section [MIX SEND] key to return to the original input channel level display. 6 F PANEL OPERATION Here you can set the following options for panel operation. • AUTO CHANNEL SELECT This specifies whether the corresponding channel will be selected when you operate a channel's [ON] key, fader, or encoder. INPUT CH (input channels) and OUTPUT CH (output channels) can be turned on/off separately. • AUTO DISPLAY For each of the following items, you can individually specify whether the related screen will automatically appear when you use the SELECTED CHANNEL section to operate a specific parameter. The following table shows the parameters corresponding to each button and the screen that will appear. Button name Corresponding parameters Screen that appears HA Input channel head INPUT HA/INSERT amp gain function screens PHASE/ATT Input channel phase/attenuator INPUT EQ function ø/ ATT screen EQUALIZER EQ-related parameters INPUT EQ/OUTPUT EQ function EQ PARAM screen DYNAMICS Gate/compressorrelated parameters INPUT GATE/COMP function or OUTPUT COMP function GATE PARAM or COMP PARAM screen DELAY Delay-related parameters INPUT DELAY/OUTPUT DELAY function screens DCA/MUTE/ SAFE DCA group / Mute group / Recall saferelated parameters INPUT DCA/GROUP function or OUTPUT DCA/GROUP function DCA GROUP ASSIGN, MUTE GROUP ASSIGN or RECALL SAFE screen TO MIX/STEREO TO MIX/TO STEREO-related parameters PAN/ROUTING function CH to MIX screen or SURR PARAM screen, or MATRIX/ST function MATRIX/ST ROUTING screen TO MATRIX Send level to MATRIX bus MATRIX/ST function MATRIX/ST ROUTING screen Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 205
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/205.png)