Yamaha DSP5D Owner's Manual - Page 124
SINGLE, OMNI ON/OFF, MULTI, CH/BANK Channel/Bank, PGM No. Program number, LIBRARY NAME
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
16 Remote control 3 In the PROGRAM CHANGE SETUP area at the left of the screen, you can select the way in which program changes will be transmitted and received, and switch reception and transmission on/off. The MODE area of PROGRAM CHANGE SETUP lets you choose one of the following as the way in which program changes will be transmitted and received. 5 In the list at the right side of the screen, display the MIDI channel (bank) and program number to which you want to assign an event, and click that line. This list lets you select the event (scene recall / effect library recall) assigned to each program number. • SINGLE If this button is on, program changes will be transmitted/received on a single MIDI channel (Single mode). • OMNI ON/OFF If this button is on, program changes of all MIDI channels will be received in Single mode (this is unavailable in Multi mode). • BANK ON/OFF If this button is on, bank select messages will be transmitted and received in Single mode (this is unavailable in Multi mode). • MULTI If this button is on, program changes will be transmitted/received on multiple MIDI channels (Multi mode). You can use the Tx (transmission) and Rx (reception) buttons to turn program change transmission and reception on/off separately. 4 In the MIDI SETUP area at the upper left of the screen, select the port at which program changes will be transmitted/received, and the MIDI channel that will be used for transmission and reception. You have the following choices. MIDI USB SLOT 1-4 The rear panel MIDI IN/OUT connectors The rear panel USB connector An I/O card installed in rear panel slot 1-4 Click the / buttons at the left and right of the Tx box (transmission) or Rx box (reception) to change the setting, and press the [ENTER] key (or click within the box) to finalize the setting. If you select USB or SLOT 1-4, use the box at the right to specify the port number (1-8) as well. If SINGLE (single mode) is selected as the program change transmission/reception mode, use the MIDI CH field to select the MIDI transmit channel and MIDI receive channel. Hint The MIDI port and MIDI channel used for program change transmission/reception can also be specified from the MIDI SETUP screen (➥ p.188). The list contains the following columns. • CH/BANK (Channel/Bank) In Multi mode, or in Single mode when the BANK ON/OFF button is off, the value in this column indicates the MIDI channel on which program changes are transmitted and received. In Single mode when the BANK ON/OFF button is on, the value in this column indicates the bank number. • PGM No. (Program number) Indicates the program number 1-128. • LIBRARY NAME In this column you can view/select the type and the number of the event assigned to each channel (bank)/ program number. Use the scroll bar at the right to display the desired channel (bank) and program number, and click that line; the line you click will move to the center and will be highlighted. 6 Click the button in the LIBRARY NAME column of the currently selected line to open the MIDI PGM CHANGE window. 124 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/124.png)