Yamaha DSP5D Owner's Manual - Page 210
UTILITY function, PM5D/PM5D-RH V2 / DSP5D Owner's Manual
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
UTILITY function FUNCTION SET NOMINAL LEVEL PARAMETER 1 - SET DEFAULT VALUE ENCODER MODE KEY SELECTED CH - PAN GAIN/ATT ALT LAYER MIX SEND FADER FLIP INSERT ON/OFF STEREO STRIP SECTION STEREO A, STEREO B MACHINE SELECT DSP5D CONTROL CH STRIP LAYER DIRECT PARAMETER 2 Explanation If you hold down this key and press the [SEL] key, the fader of that channel will be set to nominal level. (While you hold down this key, only the [SEL] keys of channels not at nominal - level will light.) Alternatively, you can set the level to nominal level by moving the cursor to an on-screen knob (level, EQ gain) or fader, and then pressing the [ENTER] key while holding down this key. If you move the cursor to an on-screen knob or fader, and - then press the [ENTER] key while holding down this key, the control will return to its default value Same function as the [PAN] key in the top panel ENCODER MODE section - Same function as the [GAIN/ATT] key in the top panel ENCODER MODE section Same function as the [ALT LAYER] key in the top panel ENCODER MODE section 1-24 Same function as the MIX SEND SELECT [1]--[24] keys in the top panel ENCODER MODE section - Same function as the [FLIP] key in the top panel FADER FLIP section - Turns insert on/off for the selected channel MONITOR, CUE Select either STEREO A/B channels, Monitor, or Cue as the function controlled by the STEREO A/B channel strip's STEREO fader and [ON] key Dark: Monitor or CUE is enabled Lit: STEREO A/B channels are enabled #1(PM5D), #2(DSP5D), #3(DSP5D) Select the PM5D or DSP5D (#2 or #3) as the machine that will be controlled by panel operations (Lit if the specified machine is selected) #1(PM5D) CH1-24, #1(PM5D) CH25-48, #2(DSP5D) CH1-24, #2(DSP5D) CH25-48, #3(DSP5D) CH1-24, #3(DSP5D) CH24-48, #1(PM5D) STIN1-4, #1(PM5D) FX RTN1-4, #2(DSP5D) STIN1-4, #2(DSP5D) FX RTN1-4, #3(DSP5D) STIN1-4, #3(DSP5D) FX RTN1-4 Switch the INPUT channel strip or ST IN/FX RTN channel strip to a layer of the desired machine (Lit if the specified layer is selected) *1. The corresponding channel will be selected in the DEFINE field of the MONITOR screen, and the monitor source will switch to DEFINE. *2. The LED will light for User Defined keys for which a screen has been memorized. The column in the right of the list in the USER DEFINE screen shows the name of the memorized screen. *3. Layers that can be memorized include the following items. - The layer selected in the INPUT channel strip (CH 1-24, CH 25-48, MIDI REMOTE) - The layer selected in the ST IN/FX RTN channel strip (ST IN 1-4, FX RTN 1-4, MIDI REMOTE) - The layer shown by the DCA channel strip (DCA, A-F, GEQ) - If the DCA channel strip is controlling GEQ, the GEQ module number and band - The encoder mode selected by ENCODER MODE (SEND, PAN, HA, ATT, ALT) - The FADER FLIP status - The currently selected MIX send - The mode selected in the MIX section (MIX SEND, MIX MASTER) - The source selected in the METER section (CH 1-24 ST IN, CH 25-48 ST IN, MIX/MATRIX) *4. The output port and MIDI channel can be specified in the MIDI SETUP screen. *5. This parameter specifies the PM5D Editor window that you want to control. If the specified window is closed or inactive, the window will be opened and made active. If the specified window is already open and active, the window will be closed. Note During PREVIEW mode, the following USER DEFINE functions that affect internal signal processing are disabled; EVENT LIST, TALKBACK ASSIGN, MONITOR, MIDI DIRECT OUT, MACHINE CONTROL, and GPI OUT CONTROL. 210 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/210.png)