Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 119

4 KEY OPERATOR PROGRAMS The key operator programs allow the administrator of the machine (key operator) to enable and disable functions to suit the needs of the workplace. This chapter explains key operator programs for the printer and scanner functions. For key operator programs that are common to all modes, see the "Key operator's guide". For the initial key operator code set at the factory, see "PROGRAMMING A KEY OPERATOR CODE" in the "Key operator's guide". KEY OPERATOR PROGRAM LIST The key operator programs for the printer and scanner functions are shown in the following table. Factory default settings are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the program is enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the checkbox ( ) indicates that "ENABLE" is selected. No checkmark ( ) indicates that "DISABLE" is selected. Mode Printer Scanner Program NOTICE PAGE Settings ENABLE, DISABLE FORCED OUTPUT OF ENABLE, DISABLE PRINT DISABLE USB SCAN YES, NO Explanation Select whether or not a Notice Page (page 30) is printed when printing is not successful due to a memory full (or other) error. When no tray has the specified size of paper, this setting is used to select whether or not the print job will be printed on the closest size of paper. Select whether or not scanning from a computer and scanning from the machine are disabled when a USB connection is used. When "YES" is selected, USB scanning is disabled. 26