Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 312

WEB FUNCTIONS OF THE MACHINE KEY OPERATOR PROGRAMS The key operator programs are used to prohibit changes to the [Condition Settings] and to configure interface settings. • Default settings: Select the setting for which you wish to prohibit changes. • Interface settings: Enable monitoring of data sent to the network port and set restrictions. Configuring a setting in the key operator programs 1 Click [Key operator programs] in the menu frame. The "Default Settings" screen of the [Key operator programs] will appear. If you wish to select a setting in the "Default Settings" screen, go to step 3. 3 Make a selection for the setting in the screen that appears. See "Key operator programs" for descriptions of the settings. 4 Click [Submit] to store the entered information. 2 Click the desired setting. Key operator programs When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of the item, and "NO" is selected when checkmark does not appear. Default settings Item Settings Prohibit Test Page Printing YES, NO Disable Default Setting YES, NO Changes Disabling of Clock Adjustment YES, NO Description This setting is used to prohibit printing of a printer test page. This setting is used to prohibit changes to the default condition settings. This setting is used to prohibit changes to the date and time settings. This item does not appear when the fax option is installed. Interface settings Item Hexadecimal Dump Mode I/O Timeout Emulation Switching Port Switching Method 28 Settings YES, NO 1- 60 - 999 (sec) Auto*, PostScript*, PCL Switch at End of Job, Switch after I/O Timeout Description This program is used to print out the print data from the computer in hexadecimal and in the corresponding text characters (based on ASCII code). This allows you to check whether or not print data is being correctly sent from the computer. During reception of a print job, if remaining data is not received after the time set here elapses, the port connection is broken and the next print job is begun. Select the printer language. When [Auto] is selected, the language is automatically selected from the data sent to the printer. Unless errors occur frequently, do not change the setting from [Auto] to another setting. *Only when the PS3 expansion kit is installed. Select the method for switching network ports.