Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 52

COPY FUNCTIONS SELECTING THE ORIGINAL SIZE If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually. Perform the following steps after placing the document in the document feeder tray or on the document glass. Note * Standard sizes: The following sizes can be detected correctly: 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" (A3, B4, A4, A4R, A5). If a non-standard size original is placed (including special sizes), the closest standard size may be displayed, or the original size may not appear. 1 Press the [SPECIAL FUNCTION] key. DUPLEX SPECIAL FUNCTION DUPLEX SCAN DUPLEX SCAN ACC. The special function screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 2 Select "ORIG. SIZE ENTER" from the menu with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 3 Press the [OK] key. BACK OK GHI The original size selection screen will appear. ORIG. SIZE ENTER INCH 11x17 8 1 2 x 14 8 1 2 x 11 4 Select the original size with the [ ] or [ ] key. The selected original size is highlighted. ORIG. SIZE ENTER INCH 11x17 8 1 2 x 14 8 1 2 x 11 • To select an AB original size, press the [ ] key and go to step 6. • If you selected "SIZE INPUT", follow steps 4 through 6 of the procedure in "USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL" (page 51) to set the horizontal and vertical dimensions of the original. 50 5 Press the [OK] key. OK You will return to the base screen and the selected original size will appear in the original size display. Selecting an AB original size 6 Select the original size with the [ ] or [ ] key. ORIG. SIZE ENTER AB A3 B4 A4 To return to selection of inch original sizes, press the [ ] key to return to step 4. 7 Press the [OK] key. OK You will return to the base screen and the selected original size will appear in the original size display. To cancel an original size selection, press Note the [CA] key.