Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 73

CARD SHOT When copying a card, this function allows you to print the front and back sides of the card next to each other on a single sheet of paper. This function creates 2 in 1 images of the front and back side of the card and centers them on the paper. Original Copy CARD Front of card CARD CARD Back of card Example: Portrait 8-1/2" x 11" size Example: Landscape 8-1/2" x 11" size • Paper cannot be fed from the bypass tray. • The card shot function cannot be used in combination with margin shift, edge erase, dual page copy, 2 in 1 / 4 in 1 copy, and XY zoom copy. • When card shot is used, the rotation copy function does not operate. 1 Place the original on the document glass. 2 Press the [SPECIAL FUNCTION] key. DUPLEX SPECIAL FUNCTION DUPLEX SCAN DUPLEX SCAN ACC. The special function screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 3 Press the [OK] key. BACK OK GHI The special modes screen will appear. SPECIAL MODES MARGIN SHIFT ERASE DUAL PAGE COPY [OK]:ADJUST 4 Select "CARD SHOT" with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN SPECIAL MODES 2in1/4in1 XY ZOOM CARD SHOT [OK]:ADJUST 5 Press the [OK] key. OK CARD SHOT SIZE(inch) X: 3 3 8 Y: 21 8 The card shot screen appears. Note The default values for the length and width that initially appear when this screen is displayed can be set in the key operator programs "CARD SHOT DEFAULT" in the "Key operator's guide". 5 6 Select "X" (width) with the [ ] or [ ] key and enter the width with the [ ] or [ ] key, and then do the same for the length (Y). CARD SHOT SIZE(inch) X: 4 Y: 4 Note Any number from 1" to 8-1/2" (25 mm to 210 mm) can be entered for the width, and any number from 1" to 8-1/2" (25 mm to 210 mm) can be entered for the length. 7 Press the [OK] key. OK You will return to the base screen. 71