Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 223

PROCEDURE FOR USING THE KEY OPERATOR PROGRAMS The key operator programs can be accessed from any mode (copy, fax, print, and scan mode). When the setting is completed, you will return to the previous mode. • Faxes cannot be sent or received while a key operator program is being used. • A key operator program cannot be used while a fax is being sent or received, while a voice call is being made, or while a received fax is being printed. INITIAL PROCEDURE 1 Press the [SPECIAL FUNCTION] key. 5 Select "FAX" with the [ ] or [ ] key. 2-SIDED COPY SPECIAL FUNCTION DUPLEX SCAN ACC. 2 Select "KEY OPE. PRG." with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION SPECIAL FUNCTION DISPLAY CONTRAST TOTAL COUNT KEY OPE. PRG. MODE SELECT COPIER PRINTER SCANNER FAX To use a key operator program for copy mode, select "COPIER". 6 Press the [OK] key. OK 3 Press the [OK] key. BACK OK GHI 4 Enter the five-digit key operator code with the numeric keys. OK ABC DEF GHI JKL MNO PQRS TUV WXYZ Enter key operator code. FUNCTION ACC. #-C @.-_ READ-END KEY OPERATOR CODE: ----- • As you enter each digit, "-" changes to " ". • If make a mistake, press the [C] key and re-enter the number. • If this is the first time you are programming the key operator code, enter the factory default code. (See "KEY OPERATOR CODE NUMBER: FACTORY SETTING" in the "Operation manual (for general information and copier)". 94 7 Select a setting for the desired program as explained on the following pages. Programs for the following functions are available: LIST PRINT/SET (page 95) INITIAL SETTING (page 96) SENDING FUNCTION (page 100) RCV. FUNCTION (page 103) POLLING SECURITY (page 107) 8 Press the [CA] key to exit the programs. Note • To move back to the previous screen, press the [BACK] key. • To cancel a program before it is completed, press the [CA] key. • See "ENTERING CHARACTERS" (page 82) for the procedure for entering letters.