Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 56

SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY zoom copying) Separate ratio settings can be selected for the length and width of a copy. Example: Reduction only in the horizontal direction Original Copy • This feature cannot be used with the 2 in 1 / 4 in 1 feature or card shot feature (when the dual function board is installed). • To use the XY zoom feature and the dual page copy feature simultaneously, set the dual page copy feature first and then the XY zoom feature. (Enlargement cannot be set.) • If automatic ratio selection has been selected, the XY zoom feature cannot be selected. If the XY zoom feature is selected, automatic ratio selection cannot be selected. • Ratios that can be selected are 25% to 400% (50% to 200% when the SPF is used). 1 Place the original in the document feeder tray or on the document glass. 2 Press the [SPECIAL FUNCTION] key. DUPLEX SPECIAL FUNCTION DUPLEX SCAN DUPLEX SCAN ACC. The special function screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 3 Press the [OK] key. BACK OK GHI The special modes screen will appear. SPECIAL MODES MARGIN SHIFT ERASE DUAL PAGE COPY [OK]:ADJUST 4 Select "XY ZOOM" with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN SPECIAL MODES DUAL PAGE COPY 2in1/4in1 XY ZOOM [OK]:ADJUST 5 Press the [OK] key. OK XY ZOOM 121% ZOOM 100% X: 100% 95% Y: 100% [ ]:X Y The XY zoom screen will appear, ready for selection of the X (horizontal) ratio. 6 Set the horizontal ratio with the or [ ] keys. A preset ratio can be selected with the [ ] or [ ] keys. The ratio can be adjusted in increments of 1% with the [ ] or [ ] keys. 54