Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 317

KEY OPERATOR PROGRAMS SPECIAL SETTINGS IP address settings This program is used to set the "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". The following screen appears when this program is selected. IP ADDRESS SETTINGS IP ADDRESS 0 0 0 0 1 Enter the IP address, subnet mask, and default gateway. [ ][ ] keys [ ][ ] keys Numeric keys [C] key ( ) [BACK] key [CA] key ( ) [SPECIAL FUNCTION] key These move the cursor up and down to select "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". These move the cursor left and right. These are used to enter numbers. Use this to cancel an entry. This cancels an entry and returns you to the previous screen. This cancels the setting and returns the display to the base screen of the mode that was in effect before the key operator programs were entered. This cancels the setting and returns the display to the base screen of the mode that was in effect before the key operator programs were entered. 5 2 When you have completed all settings, press the [OK] key. The settings will be saved. 3 Turn off the machine power, wait for a few seconds, and then turn on the power again. The new settings will take effect after the power is turned on. 33