Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 269

HOW TO USE THE NETWORK SCANNER FUNCTION TRANSMITTING A TWO-SIDED ORIGINAL Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.) Do not use an original that is not a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R, B5, B5R, or A5). Note Otherwise a scanning error or cut-off image may result. 1 Make sure the machine is in scan mode. PRINT When the SCAN indicator is lit, the machine is in scan mode. If SCAN the indicator is not on, press the [SCAN] key. If auditing LINE DATA COPY EXP mode has been enabled for the FAX SCAN COL scan function in the key operator programs, a message will appear prompting you to enter your account number when you switch to scan mode. Enter your account number (five digits) with the numeric keys. (Page 19) 2 Place the original(s) in the document feeder tray. For information on placing an original, see "4. COPY FUNCTIONS" of the "Operation manual (for general information and copier)". 3 Check the original size. OM AUTO % OUTPUT DUPLEX SPEC ESS FORMAT ORIGINAL SIZE DUPLEX SCAN ESS BROADCAST ORIGINAL SIZE DUPLEX SCAN ORIGINAL SIZE INCH 11x17 8 1 2 x 1 4 8 1 2 x 1 1 Press the [ORIGINAL SIZE] key to open the original size selection screen. See "MANUALLY SETTING THE SCANNING SIZE" (page 26) to set the original size. 4 Press the [DUPLEX SCAN] key. 5 Select "2-SIDED" with the [ ] or [ ] key. GH DUPLEX SCAN 1-SIDED PQR 2-SIDED DUPLEX SPECIAL FUNCTION DUPLEX SCAN 6 Press the [OK] key. 2 BACK OK The duplex original type selection screen appears. GHI 7 Select booklet or tablet for the duplex original type with the [ ] or [ ] key. DUPLEX STYLE BOOKLET 8 Press the [OK] key. OK O % OUTPUT DUPLEX SPECIAL FUNCTI MAT ORIGINAL SIZE DUPLEX SCAN CAST ORIGINAL SIZE DUPLEX SCAN DUPLEX SCAN 1-SIDED 2-SIDED The duplex mode selection screen appears. You will return to the base screen and the duplex scanning mode icon will appear. 9 Continue from step 4 of "BASIC TRANSMISSION PROCEDURE" (page 20). Note • Two-sided scanning is not possible when "COLOR MODE" is set to "COLOR" or "GRAY". • Booklets and tablets Two-sided originals that are bound at the side are booklets, and two-sided originals that are bound at the top are tablets. • Two-sided scanning mode turns off after the transmission is finished. Two-sided scanning mode can also be canceled by pressing the [CA] key. • Two-sided scanning is only possible when an RSPF is used. Automatic scanning of both sides of an original is not possible when the document glass is used. • Two-sided scanning of originals longer than 11" x 17" (A3) is not possible. • To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key. BOOKLET TABLET 25