Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 169

ADVANCED TRANSMISSION METHODS 7 Select "1 TIME" or "REPEAT" with the [ ] or [ ] key. SELECT SENDING 1 TIME REPEAT If you select "1 TIME", the document data is automatically cleared from memory after your machine is polled once. If you select "REPEAT", the document data in memory can be used repeatedly. If you selected "ADD" or "CHANGE" in step 6, the transmission settings selected when the previous document was scanned into the Public Box will be replaced by the settings that you will select this time. 8 Press the [OK] key. OK 9 Press the [START] key ( ). WXYZ @.-_ READ-END • Scanning begins. • If you are scanning from the document glass and have another page to scan, change pages and press the [START] key ( ). Repeat until all pages have been scanned and then press the key. 10 Make sure that the reception mode is set to auto reception. Transmission begins when the other machine calls and polls your machine. Note To cancel scanning To cancel scanning of a document while scanning is in progress, press the [C] key. To erase the documents in the Public Box, follow the procedure in "Deleting documents from the Public Box" (page 41). Printing documents in the Public Box To check the document that is stored in the public box, follow these steps to print it out. 1 Follow steps 2 to 6 of "Scanning a document into polling memory (the Public Box)" (page 39) and then follow the steps below. 2 Select "PRINT" with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION ORIGINAL ADD CHANGE DELETE PRINT 3 Press the [OK] key. BACK OK Printing begins automatically. GHI 40