Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 237

9 APPENDIX This chapter contains the specifications of the fax function and the index. SPECIFICATIONS For information on power requirements, power consumption, dimensions, weight, and other specifications that are common to all features of the machine, see "SPECIFICATIONS" in the "Operation manual (for general information and copier)". Applicable telephone line Compression method Transmission mode Scanning method Scanning resolution (supports ITU-T standards) Printing method Transmission speed Transmission time*1 Paper size Effective recording width Transmittable original size Effective scanning width Halftone transmission Contrast adjustment Extension telephone connection Auto-dialling Timer Transmission Program function F-code support Auto document feeding Image memory Error Correction Mode (ECM) Public switched telephone network MH, MR, MMR, JBIG Super G3, G3 (this machine can only communicate with fax machines that support the G3 or Super G3 standard) Flatbed CCD 8 x 3.85 lines/mm (Standard) 8 x 7.7 lines/mm (Fine, Fine-Halftone) 8 x 15.4 lines/mm (Super Fine, Super Fine - Halftone) 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone) Electrophotography 33.6 kbps down to 2.4 kbps Automatic fallback 2 seconds (Super G3 mode / 33.6 kbps, JBIG), 6 seconds (G3 ECM mode / 14.4 kbps, JBIG) A3 to A5, 8-1/2" x 11" (Inch-based machine: 11" x 17" to 5-1/2" x 8-1/2", A4) 293 mm max. (A3 printing) or 11.5" max. (11" x 17" printing) A3 to A5 (Inch-based machine: 11" x 17" to 5-1/2" x 8-1/2") Refer to "Image rotation" (page 25) for transmission of A5 size documents. Maximum 297 mm (11.7") Yes (256 levels) Automatic (5 levels by manual adjustment) Possible (1 telephone) A combined total of 50 Rapid dial and group dial keys can be stored; 300 speed dial destinations can be stored. Yes Yes (9 programs) Yes (can transmit and receive SUB/SEP (sub-address) and SID/PWD (passcode) signals) Yes (maximum of 40 sheets, 30 sheets of 90 g/m2 (24 lbs.) paper, or total stack thickness of 4 mm (5/32") or less) 2 MB*2 Yes *1 Transmission speed is for an A4 or 8-1/2" x 11" document with approximately 700 characters at standard resolution (8 x 3.85 lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps (JBIG)). This is only the time required to transmit the image information; the time required to send protocol signals is not included. Actual transmission times will vary depending on the contents of the document, the receiving machine type, and telephone line conditions. *2 Image memory can be expanded by installing the additional fax memory (8 MB). Some discrepancies may exist in the illustrations and content due to improvements to the machine. 108