Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 318
Network connection problems - lan setup
View all Sharp AR M162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
6 TROUBLESHOOTING TROUBLESHOOTING This chapter explains what to do when the machine does not connect to the network or when problems occur during printing. For problems related to the machine such as running out of paper or paper misfeeds, see the "Operation manual (for general information and copier)". Network connection problems Problem The machine does not connect to the network. Cause and solution The LAN cable is disconnected. → Make sure that the LAN cable is firmly inserted in the connectors on the machine and your computer. To connect the cable, see the "Software setup guide". Is the machine configured for use on the same network as the computer? → The machine cannot be used if it is not connected to the same network as the computer, or if it is not configured for use on the network. For more information, consult your network administrator. (Points to check on the Macintosh) AppleTalk is disabled. → In Mac OS X, click [Network] in [System Preferences] and select Ethernet in "Show". Click the [AppleTalk] tab and make sure that [Make AppleTalk Active] is selected. In Mac OS 8.6 to 9.2.2, open [Chooser] from the Apple menu and make sure that [Active] is selected. Printing is not possible if [Active] is not selected. [Ethernet] is not selected for "Connect via" for AppleTalk? (Mac OS 8.6 to 9.2.2) → Open [AppleTalk] from the [Control Panels] and make sure that [Ethernet] is selected in the "Connect via" menu. Printing is not possible if [Ethernet] is not selected. Page Software setup guide - - 34