Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 151
Faxing A Two-sided Original
View all Sharp AR M162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
BASIC OPERATIONS FAXING A TWO-SIDED ORIGINAL Follow the steps below to automatically transmit both sides of a two-sided original. (This is only possible on models that have an RSPF installed.) Note Do not use an original that is not a standard size (A3, B4, A4, A4R, A5, 8-1/2" x 11", 8-1/2" x 11"R (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, A4, A4R if the machine uses inch-based paper sizes)). Otherwise a scanning error or cut-off image may result. 1 Make sure that the machine is in fax mode. SCAN When the machine is in fax mode, the [FAX] key indicator is LINE DATA COPY EXP FAX lit. If the indicator is not on, press SCAN COLO the [FAX] key. If auditing mode FAX PR has been enabled for the fax function in the key operator programs, a message will appear prompting you to enter your account number when you switch to fax mode. Enter your account number (five digits) with the numeric keys. (See "ACCOUNT CONTROL" on page 98.) 2 Place the original(s) in the document feeder tray. (See "USING THE SPF" on page 13.) 3 Check the original size. PY AUTO 2-SIDED TIO IMAGE OUTPUT COPY SPEC ESS FORMAT ORIGINAL SIZE DUPLEX SCAN BROADCAST ORIGINAL SIZE AB AUTO A4 A4R When the [ORIGINAL SIZE] key is pressed, the size selection screen appears. If the original size was not correctly detected, see "MANUALLY SETTING THE SCANNING SIZE" (page 14) and set the correct original size. 4 Press the [DUPLEX] key. TO 2-SIDED GE OUTPUT COPY SPECIAL FUNCTI MAT CAST ORIGINAL SIZE DUPLEX SCAN DUPLEX SCAN 1-SIDED 2-SIDED 5 Select "2-SIDED" with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION DUPLEX SCAN 1-SIDED 2-SIDED 6 Press the [OK] key. BACK OK The duplex original type selection screen appears. GHI 7 Select book or tablet for the duplex original type with the [ ] or [ ] key. DUPLEX SCAN BOOKLET 8 Press the [OK] key. You will return to the base screen and the duplex scanning mode icon will appear. 9 Continue from step 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 18) . The duplex mode selection screen appears. Note • Booklets and tablets Two-sided originals that are bound at the side are booklets, and two-sided Booklet originals that are bound at the top are tablets. • Duplex scanning is cancelled when the transmission is completed, or when the [CA] key is pressed. • Duplex scanning of two-sided originals is only possible when an RSPF is used. Automatic scanning of both sides of an original is not possible when the document glass is used. • Automatic scanning of both sides of an original longer than A3 (11" x 17") is not possible. • The image of the back side of the original is rotated 180 degrees if needed at the time of transmission, and thus there is no need to change the orientation at the receiving machine. • To cancel duplex scanning, select "1-SIDED" in step 5 and then press the [OK] key. • When duplex scanning is enabled, dual page scan (page 43) cannot be enabled. 22 Tablet