Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 180

TRANSMISSION USING F-CODES USING F-CODE POLLING MEMORY In order for another machine to retrieve a document from your machine, you must first scan the document into the F-code polling memory box. You can check the document in the memory polling box by printing it out. (See "Checking and clearing document data in a box" on page 52.) Note When using F-code polling memory, do not set the reception mode to manual reception. Scanning a document into an F-code polling memory box The procedure for scanning a document into an F-code polling memory box (page 77) is in general the same as "Scanning a document into polling memory (the Public Box)" on page 39. 1 Perform steps 1 through 4 of "Scanning a document into polling memory (the Public Box)" (page 39). 2 Select "S.A.M-POLL ORIG" with the [ ] or [ ] key. GH SELECT READING MEMORY POLLING PQR 2-SIDED COPY SPECIAL FUNCTION S.A.M-POLL ORIG 4 3 Press the [OK] key. BACK OK GHI 4 Select the name of the polling memory box with the [ ] or [ ] key. SEL S.A. POLL BX Document Plan Document Tech LIST DETAIL If not all letters of the programmed name appear, press the key to display all letters. Press the key again to return to the previous display. About the steps that follow See steps 6 through 10 in "Scanning a document into polling memory (the Public Box)" (pages 39 to 40). Where "public box" (page 39) appears in the procedure, substitute "F-code polling memory box". 51