Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 54
Reducing Or Enlarging A Copy
View all Sharp AR M162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
REDUCING OR ENLARGING A COPY There are three ways to enlarge and reduce copies: • Automatic selection of a ratio according to the paper size: Auto ratio selection • Specifying a ratio from 25% to 400%: Preset ratios/zoom • Selecting the vertical and horizontal ratios separately: XY zoom Note When the SPF is being used, the zoom copy ratio range is 50% to 200%. AUTOMATIC RATIO SELECTION 1 Place the original in the document feeder tray or on the document glass. 3 Press the [AUTO%] key. PER ZOOM AUTO % OUTPUT DUPL OLUTION ADDRESS FORMAT ORIGINAL SIZE DUPLEX OLUTION ADDRESS BROADCAST ORIGINAL SIZE DUPLEX The original size will appear in the display. If the correct size does not appear, see "SELECTING THE ORIGINAL SIZE" (page 50). Note Automatic ratio selection can be used when the original size is 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R and A5. It cannot be used for other sizes. 2 Press the [PAPER] key to select the desired tray. If the bypass tray is selected, OPY EXPOSURE PAPER ZOOM AUTO automatic ratio selection cannot be used. CAN COLOR MODE RESOLUTION ADDRESS FORMA FAX PROGRAM RESOLUTION ADDRESS BROADCA • The copy ratio will be automatically set. • If the original and paper are in different orientations, the image is automatically rotated to match the paper orientation (rotation copy). However, if enlargement is selected for copying onto a paper size larger than 8-1/2" x 11" (A4), the image will not be rotated. • Rotation of the image can be disabled in the key operator programs when reducing or enlarging a original. (See the "Key operator's guide".) • If the message "Image edge loss." is displayed, part of the original image may be cut off. 4 Set the number of copies and press the [START] key ( ). WXYZ • To cancel automatic ratio selection, press the [AUTO%] key again. • When copying from the SPF, automatic ratio selection mode will automatically disable after the [START] key is pressed and the original is scanned. MANUAL RATIO SELECTION (PRESET COPY RATIOS/ZOOM) 1 Place the original in the document feeder tray or on the document glass. 2 Press the [ZOOM] key. SURE PAPER ZOOM AUTO % OUTP R MODE RESOLUTION ADDRESS FORMAT ORIGINAL GRAM RESOLUTION ADDRESS BROADCAST ORIGINAL Copy ratios that can be selected will appear. ZOOM 121% 100% 95% ZOOM 100% 52