Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 195

PROGRAMMING [Transmission speed setting] To set the transmission speed, complete steps 1 through 13 on pages 62 to 64 and then follow the steps below. Note Set the transmission speed only when you know what speed is most suitable, such as when you are sending a fax to a foreign country and telephone line conditions are bad. If you do not know the line conditions, do not change this setting. 1 Select "TX SPEED" with the [ ] or [ ] key. OTHERS SUB ADDRESS CHAIN DIAL TX SPEED [START]:ENTER 2 Press the [OK] key. OK [International transmission mode setting] To set the international transmission mode, complete steps 1 through 13 on pages 62 to 64 and then follow the steps below. Note • When sending a fax to a foreign country, telephone line conditions can sometimes distort the fax or interrupt the transmission. Selecting the right international transmission mode can help alleviate these problems. • If errors frequently occur when sending a fax to a foreign country, try each of modes 1 to 3 and select the mode that enables the best transmission. 1 Select "INTERNATIONAL TX" with the [ ] or [ ] key. OTHERS CHAIN DIAL TX SPEED INTERNATIONAL TX [START]:ENTER 2 Press the [OK] key. OK 3 Select the desired transmission speed with the [ ] or [ ] key. TX SPEED 33600bps 14400bps 9600bps 4800bps 4 Press the [OK] key. OK 3 Select the desired mode with the [ ] or [ ] key. INTERNATIONAL TX OFF MODE 1 MODE 2 MODE 3 4 Press the [OK] key. OK Note If you select a speed other than 33,600 bps (maximum speed), a checkmark will appear next to "TX SPEED" when you return to the option setting screen. This setting is not effective for polling transmission. To remove the checkmark and return the transmission speed setting to "33,600 bps (maximum speed)", press the key. 5 Return to step 13 on page 64. 66 Note If you select a setting other than "OFF", a checkmark will appear next to "INTERNATIONAL TX" when you return to the option setting screen. To remove the checkmark and return the international transmission mode to "OFF", press the key. 5 Return to step 13 on page 64.