Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 133

TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE Several points must be kept in mind when using this product as a facsimile. Please note the following. Line connection Be sure to use the provided telephone line cord to connect the machine to a telephone line jack. Insert one end of the telephone line cord into the LINE jack on the left side of the machine as shown. Insert the other end of the telephone line cord into a telephone line jack. LINE jack Insert the plug firmly until you hear a "click". In some countries, an adapter is required to connect the telephone line cable to the wall telephone socket, as shown in the illustration. For United Kingdom Wall socket Adapter For Australia For New Zealand Power switch Keep the machine power switch turned on at all times. Do not turn off the power. If the power is turned off, the fax function cannot be used. When the power is off, the machine cannot receive faxes. Before turning off the power, make sure the machine is idle. If the power is turned off while the machine is in operation, a paper jam may occur. If settings are being configured, the settings will be cancelled. Power switch Setting the date and time and programming your sender's name and number Before using the fax function, you must set the date and time and program your sender's name and number in the machine. This procedure is explained in "POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" on page 7 of this manual. 4