Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 120

USING THE KEY OPERATOR PROGRAMS Follow the steps below to access the key operator settings for the printer and scanner functions. 1 Press the [SPECIAL FUNCTION] key. 6 Press the [OK] key. DUPLEX SPECIAL FUNCTION DUPLEX SCAN DUPLEX SCAN The special function screen appears. ACC. 2 Select "KEY OPERATOR PRG." with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN SPECIAL FUNCTION PAPER SIZE SET DISPLAY CONTRAST TOTAL COUNT KEY OPERATOR PRG. OK PRINTER NOTICE PAGE FORCED OUTPUT OF PRINT The settings of the selected mode will appear. Example: The above screen shows the settings when printer mode is selected. 7 Select the desired program with the [ ] or [ ] key. 3 Press the [OK] key. BACK OK Enter key operator code. GHI The key operator code entry screen will appear. KEY OPERATOR CODE: ----- 4 Use the numeric keys to enter the key operator code. OK ABC DEF GHI JKL MNO PQRS TUV WXYZ FUNCTION @.-_ ACC. #-C READ-END MODE SELECT KEY OP. # CHANGE COPIER PRINTER SCANNER • " " will appear for each digit entered. • The mode selection screen will appear. 5 Select the desired mode with the [ ] or [ ] key. MODE SELECT KEY OP. # CHANGE COPIER PRINTER SCANNER • A checkbox appears to the left of several of the programs. To enable a function (make a checkmark appear), press the [OK] key. To cancel a selection, press the [OK] key once again to remove the checkmark and disable the function. Go to step 9. • When the [OK] key is pressed for a program that does not have a checkbox, the settings for the program appear. 4 8 Press the [OK] key and follow the instructions in the program screen. OK 9 To use another program for the same mode, select the desired program with the [ ] or [ ] key. To use a program for a different mode, press the [BACK] key and select the desired mode. To exit the key operator programs, press the [CA] key ( ). 27