Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 182

TRANSMISSION USING F-CODES PROCEDURE FOR F-CODE POLLING Make sure that a document has not been placed in the document feeder tray or on the document glass, and then follow the steps below. Note • You must know the sub-address (SEP) and passcode (PWD) of the other machine's F-code polling memory box. • Serial polling (selecting multiple fax machines to be polled using a group key, Rapid keys, and Speed Dial numbers) is not possible when using F-code polling. 1 In Fax mode, press the [SPECIAL FUNCTION] key. 2-SIDED COPY SPECIAL FUNCTION DUPLEX SCAN When the [SPECIAL FUNCTION] key is pressed, the special function selection ACC. screen appears. (To select fax mode, see step 1 on page 18.) 2 Select "SENDING OPTIONS" with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION SPECIAL FUNCTION FAX PRINT HOLD TIMER MODE SENDING OPTIONS 6 Enter the fax number of the other machine with the numeric keys, or press a Rapid key, or dial a Speed Dial number (a group key cannot be used). To clear a mistake when WXYZ entering a number with the numeric keys, press the [C] key 26 27 28 29 to clear one digit at a time. A B C 31 32 33 34 F G H A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key. 7 Press the [OK] key. 4 OK 3 Press the [OK] key. BACK OK GHI 4 Select "SUB ADD POLLING" with the [ ] or [ ] key. SENDING OPTIONS SERIAL POLLING SUB ADDRESS TX SUB ADD POLLING 5 Press the [OK] key. OK 8 Enter the sub-address (up to 20 digits) with the numeric keys. WXYZ • Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space. • If you make a mistake, press the [C] key and re-enter the correct digit(s). • If you specified a Rapid key or Speed Dial number in step 6 that has a sub-address programmed, the sub-address will appear. Go to the next step without entering a sub-address. 9 Press the [OK] key. OK 53