Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 248

SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be configured. To configure the settings, use a computer that is connected to the same network as the machine to access the machine's Web server. The Web page can be viewed with your Web browser (Internet Explorer 5.5 or later (Windows)/5.1 or later (Macintosh), or Netscape Navigator 6.0 or later). HOW TO ACCESS THE WEB PAGE AND VIEW HELP Use the following procedure to access the Web pages. [Help] can be clicked at the bottom of the menu frame to view information on the various function settings that can be operated remotely over the network from the machine's Web pages. For the settings of each function, see the explanations in Help. 1 Open the Web browser on your computer. Supported browsers: Internet Explorer 5.5 or later (Windows)/ 5.1 or later (Macintosh) Netscape Navigator 6.0 or later 2 In the "Address" field of your Web browser, enter the IP address of the machine. To check the IP address, see "CHECKING THE IP ADDRESS" (page 37). When the connection is complete, the Web page will appear in your Web browser. ☞ABOUT THE WEB PAGE (FOR USERS) (page 5) 3 Click [Help] under the menu frame. For an explanation of a function or setting in the Web page, click the corresponding item in the Help screen. 4 Close the Web page. When you have finished using the Web page, click the (close) button in the top right corner of the page. 4