Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 166

ADVANCED TRANSMISSION METHODS USING THE POLLING FUNCTION When used in conjunction with the timer transmission function (page 34), only one polling job can be stored. Note If the other machine is using polling security (see "Restricting polling access (polling security)" on page 41), your fax number (sender's number) must be programmed in the key operator programs (see "OWN PASSCODE SET" on page 96) and your number must also be programmed in the other machine. 1 In Fax mode, press the [SPECIAL FUNCTION] key. 2-SIDED COPY SPECIAL FUNCTION DUPLEX SCAN When the [SPECIAL FUNCTION] key is pressed, the special function menu appears. ACC. (To select fax mode, see step 1 on page 18.) 2 Select "SENDING OPTIONS" with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION SPECIAL FUNCTION FAX PRINT HOLD TIMER MODE SENDING OPTIONS 3 Press the [OK] key. BACK OK GHI 5 Press the [OK] key. OK 6 Enter the fax number of the other machine with the numeric keys, press a Rapid key, or specify a Speed Dial number (a group key cannot be used). To clear a mistake when WXYZ entering a full number with the numeric keys, press the [C] key 26 27 28 29 to clear one digit at a time. A B C 31 32 33 34 3 F G H A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key. 7 Press the [OK] key. OK 4 Select "POLLING" with the [ ] or [ ] key. SENDING OPTIONS POLLING SERIAL POLLING SUB ADDRESS TX 8 Press the [START] key. WXYZ @.-_ READ-END "Polling reservation has been set." appears in the screen. After communicating with the other machine, your machine prints the received fax. Note To cancel the operation During communication: Cancel as explained in "Cancelling a fax transmission" on page 26. While the job is stored: Cancel as explained in "Cancelling a stored transmission job" on page 27. 37