Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 188

TRANSMISSION USING F-CODES USING THE F-CODE RELAY BROADCAST FUNCTION (your machine is the relay machine) When a document is received from a relay request machine, the F-code relay broadcast function transmits the document to the end receiving machines using a memory box only if the sub-address and passcode sent by the relay request machine are correct. To create, edit, or delete an F-code relay group (box), see pages 74, 76 and 79. A document received from a relay request machine is initially stored in the box of your machine. Your machine (the relay machine) also prints the document, thus the document is first stored as a print job and then as transmission jobs to each of the programmed end receiving machines. The document data is automatically cleared after transmission to all end receiving machines is completed. Transmission to the end receiving machines cannot be stopped or cancelled. USING THE F-CODE RELAY REQUEST FUNCTION (your machine requests a relay broadcast) Ask the operator of the other F-code machine (the relay machine) to create an F-code relay group (box) that contains the end receiving machines to which you wish to send a fax, and ask for the sub-address (SUB) and passcode (SID) of that box. When you dial the relay machine to send the fax, enter the sub-address and passcode after the fax number. The fax will be stored in the relay machine's memory box, and the relay machine will call each of the programmed end receiving machines and relay the fax to those machines. (If a passcode (SID) is not programmed in the box , enter only the sub-address when dialling.) To dial the relay machine, use the same procedure as in "F-CODE TRANSMISSION (F-CODE CONFIDENTIAL TRANSMISSION)" (page 55). 4 59