Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 62

COPY FUNCTIONS ONE-SIDED COPIES OF TWO-SIDED ORIGINALS (ONLY WHEN USING THE RSPF) • Paper sizes that can be used are 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, B5, B5R and A5. • Automatic two-sided copying is not possible when the bypass tray is used. • This copy function cannot be used in combination with dual page copy. 1 Make sure that an original does not remain on the document glass, and then adjust the original guides to the width of your originals and place the originals face up in the document feeder tray. 4 If you wish to have the orientation of the back image be opposite the orientation of the front image, set "BINDING CHANGE" to "ON" with the [ ] or [ ] key. COPY MODE 1 to 2 2 to 2 2 to 1 BINDING CHANGE ON 2 Press the [DUPLEX] key. O % OUTPUT DUPLEX SPECIAL FUNCTI MAT ORIGINAL SIZE DUPLEX SCAN CAST ORIGINAL SIZE DUPLEX SCAN COPY MODE 1 to 1 1 to 2 2 to 2 The duplex mode selection screen appears. 3 Select "2 to 1" with the [ ] or [ ] key, or with the [DUPLEX] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN COPY MODE 1 to 2 2 to 2 2 to 1 BINDING CHANGE OFF If the copies are to be bound at the top, reversing the orientations of the front and back images will result in a uniform orientation when the bound copies are viewed (note that this may depend on the orientation of the originals). 5 Press the [OK] key. BACK OK You will return to the base screen. GHI 6 Set the number of copies and press the [START] key ( ). To stop copying in the middle of WXYZ a run, press the [C] key. Do not touch an original (A) that is on the Note reversing tray. Doing so may cause a misfeed. (A) 60