Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 183
Enter a passcode maximum 20 digits, with the numeric keys., Press the [OK] key., Press the [START]
View all Sharp AR M162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
TRANSMISSION USING F-CODES 10 Enter a passcode (maximum 20 digits) with the numeric keys. WXYZ 11 Press the [OK] key. OK • Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space. • If you make a mistake, press the [C] key and re-enter the correct digit(s). • If the other machine has not programmed a passcode, omit the passcode and go to the next step. • If you specified a Rapid key or Speed Dial number in step 6 that has a passcode programmed, the passcode will appear. Go to the next step without entering the passcode. 12 Press the [START] key ( ). WXYZ @.-_ READ-END After communicating with the other machine, your machine will print the received document. Note • To cancel the operation During communication: Cancel as explained in "Cancelling a fax transmission" on page 26. While the job is stored: Cancel as explained in "Cancelling a stored transmission job" on page 27. • Only one F-code polling operation with a timer setting (page 34) can be stored. 54