Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 152

BASIC OPERATIONS Transmission settings (memory transmission mode and direct transmission mode) Transmission modes include memory transmission, where the original is temporarily scanned into memory before transmission, and direct transmission, where the original is transmitted directly without being scanned into memory. There are two types of memory transmission: "Storing a transmission" (page 24), where all pages of the original are scanned into memory before transmission begins, and "Quick online transmission" (page 25), where the destination is dialled after the first page is scanned and the remaining pages are transmitted as they are scanned. During a memory transmission, it may happen that the memory becomes full while the originals are being scanned. (See "If the memory becomes full during transmission of a stored transmission job" on page 24 and "If the memory becomes full during a quick online transmission" on page 25.) The number of pages that can be stored in memory varies depending on the content of the pages, the transmission settings, and whether memory has been added. If there are too many pages and memory transmission is not possible, you can press the [COMM. SETTING] key to switch from memory transmission to direct transmission. When direct transmission is used, transmission begins after the current job is completed, allowing you to give priority to a transmission job. As such, direct transmission is a convenient means of performing an interrupt transmission when there are a large number of stored transmission jobs. To switch between memory transmission and direct transmission, see the following "Faxing by direct transmission". When transmission is performed manually using an extension phone connected to the machine or using on-hook Note dialling, direct transmission is automatically selected. (Memory transmission is not possible.) 2 Faxing by direct transmission 1 Perform steps 1 to 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 18). 2 Press the [COMM.SETTING] key 49 50 W XYZ SP SE SPEED COMM. SETTING SYMBOL SPACE/- The communication settings screen appears. Note The communication settings screen can also be displayed from the function selection screen. Press the [SPECIAL FUNCTION] key to display the special function selection screen, select "COMM. SETTING" with the [ ] or [ ] key, and press the [OK] key. 3 Select "TX" with the [ ] or [ ] key. 4 Press the [OK] key. BACK OK GHI 5 Select "DIRECT TX" with the [ ] or [ ] key. SELECT SENDING MEMORY TX DIRECT TX 6 Press the [OK] key. OK GH PQR 2-SIDED COPY SPECIAL FUNCTION COMM. SETTING TX RX 7 Dial the fax number. OK ABC DEF GHI JKL MNO PQRS TUV WXYZ FUNCTION @.-_ ACC. #-C READ-END Group dialling cannot be used. 23