Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 60

COPY FUNCTIONS Copying from the document glass 1 Place the original for the front side of the copy on the document glass, and close the SPF. 6 Make sure that the desired paper tray is selected. 7 Set the number of copies and press the [START] key ( ). WXYZ 2 Press the [DUPLEX] key. O % OUTPUT DUPLEX SPECIAL FUNCTI MAT ORIGINAL SIZE DUPLEX SCAN CAST ORIGINAL SIZE DUPLEX SCAN COPY MODE 1 to 1 1 to 2 2 to 2 The duplex mode selection screen appears. 3 Select "1 to 2" with the [ ] or [ ] key, or with the [DUPLEX] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN COPY MODE 1 to 1 1 to 2 2 to 2 BINDING CHANGE OFF 4 If you wish to have the orientation of the image on the back of the copy paper be opposite the orientation of the image on the front, set "BINDING CHANGE" to "ON" with the [ ] or [ ] key. COPY MODE 1 to 1 1 to 2 2 to 2 BINDING CHANGE ON 5 Press the [OK] key. BACK OK You will return to the base screen. GHI 8 Remove the first original and then place the original for the back side of the copy on the document glass. Close the SPF and press the [START] key ( ). WXYZ @.-_ READ-END • The copy will be delivered to the center tray. • To cancel two-sided copying, press the [C] key. • To cancel two-sided (duplex) copy mode, press the [DUPLEX] key to select "1 to 1" and then press the [OK] key. • When making two-sided copies of an odd number of originals, touch the [READ-END] key ( ) after scanning the last original. 58