Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 308

WEB FUNCTIONS OF THE MACHINE Printer condition settings Factory default settings are indicated in bold. Default settings Item Copies Orientation Settings 1-999 Portrait, Landscape Default Paper Size A3, B4, A4, A4R, B5, B5R, A5, Ledger, Legal, Foolscap, Letter*, Letter-R, Invoice Default Paper Source Auto, Tray 1, Tray 2*, Tray 3*, Tray 4*, Bypass (Manual), Bypass (Auto) Disable Blank Page Print Enable, Disable 2-Sided Print 1-Sided, 2-Sided (Book), 2-Sided (Tablet) ROPM* Enable, Disable Description This is used to select the number of copies. This sets the orientation of the printed page. Select [Portrait] when the image is longer in the vertical direction, or [Landscape] when the image is longer in the horizontal direction. This sets the default paper size used for printing. Even if the set size of paper is not in any of the trays, the printed image is formed in accordance with this setting. *Factory default setting is A4 in some regions. Set the default paper tray. *Selections available depend on the trays that are installed. When this is set to "Enable", blank pages are not printed. When [2-Sided (Book)] is selected, two-sided printing takes place so as to allow binding at the left side. When [2-Sided (Tablet)] is selected, two-sided printing takes place so as to allow binding at the top. (Only for models that support two-sided printing.) This enables the ROPM function. When enabled, multi-page print jobs are stored in memory before printing, and thus the computer does not need to repeatedly send the print data when multiple copies are printed. * This setting is only effective when the dual function board is installed. PCL settings Item Symbol Set Font Line Feed Code Wide A4 Settings Select one of 35 sets. Select one internal or one expansion font. CR=CR; LF=LF; FF=FF, CR=CR+LF; LF=LF; FF=FF, CR=CR; LF=CR+LF; FF=CR+FF, CR=CR+LF; LF=CR+LF; FF=CR+FF Enable, Disable Description This specifies which country's characters (PCL symbol set) are assigned to certain of the symbols in the character code list. The factory default setting is [PC-8]. This specifies which PCL font to use for printing. One font can be specified from among the internal fonts and expansion fonts (when the barcode font kit or the Flash ROM kit is installed). The factory default setting is [0:Courier]. This specifies the line break code by means of a combination of the "CR" (return) code, "LF" (line break) code, and "FF" (page break) code. The factory default setting is printing based on the transmitted code. The setting can be changed by selecting one of four combinations. This setting can be enabled to print 80 lines on A4 size paper with each line 10CPI font (English characters). When the setting is disabled (a checkmark does not appear), each line is 78 characters long. PostScript settings "PostScript Settings" only appears when the PS3 expansion kit is installed. Item Print PS Errors Settings Enable, Disable Description When this setting is enabled, an error description is printed each time a PostScript error occurs. 24