Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 270

CHECKING THE SIZE OF A PLACED ORIGINAL When a standard-size* original is placed in the document feeder tray or on the document glass, the original size is automatically detected (automatic original detection function) and displayed in the original display. Make sure that the size has been detected correctly. Ready to scan. XXXXX COLOR 150dpi (1) When an original is placed, an icon appears to indicate the original scanning mode. PDF MULTI : One-sided scanning from the SPF : Scanning from the document glass : Two-sided scanning from the RSPF 8 1 2 x 1 1 (1) (2) (2) The original size is displayed. If a non-standard size original is placed or if you wish to change the scanning size, follow the steps below to manually set the original scanning size. Note * Standard sizes: The following sizes are standard sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" (A3, B4, A4, A4R, B5, B5R, A5). If a non-standard size original (including a special size) is placed, a standard size close to the original size may appear, or the original size may not be displayed. STORING SCANNING SETTINGS Sets of scanning settings (scan size, color mode, resolution, file type, etc.) can be stored for use in various scanning applications. MANUALLY SETTING THE SCANNING SIZE If you load an original that is not a standard size, or the original size is not correctly detected, be sure to press the [ORIGINAL SIZE] key and set the original size manually. Perform the following steps after loading the document in the document feeder tray or on the document glass. 1 Press the [ORIGINAL SIZE] key. OM AUTO % OUTPUT DUPLEX SPEC ESS FORMAT ORIGINAL SIZE DUPLEX SCAN ESS BROADCAST ORIGINAL SIZE DUPLEX SCAN The original size selection screen will appear. ORIGINAL SIZE INCH 11x17 8 1 2 x 1 4 8 1 2 x 1 1 2 Select the original size with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN The selected original size is highlighted. ORIGINAL SIZE INCH 11x17 8 1 2 x 1 4 8 1 2 x 1 1 To select an AB size, press the [ ] key and go to step 4. When the [ ] key is pressed, the original size selection screen for AB sizes appears. ORIGINAL SIZE AB A3 B4 A4 3 Press the [OK] key. BACK OK You will return to the base screen and the selected original size will appear in the original display. GHI 26