Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 271

HOW TO USE THE NETWORK SCANNER FUNCTION Selecting an AB original size 4 Select the original size with the [ ] or [ ] key. ORIGINAL SIZE AB A3 B4 A4 To return to the selection of inch original sizes, press the [ ] key and return to step 2. 5 Press the [OK] key. OK You will return to the base screen and the selected original size will appear in the original display. Note To cancel a manual original size setting, press the [CA] key. If it is not possible to select the actual original size, select a size that is larger than the actual original size. If a smaller size is selected, part of the original will not be transmitted. SELECTING THE COLOR MODE After placing the original, you can select an appropriate color mode for the original type. Place the original in the 2 document feeder tray or on the document glass (steps 1 to 3 on page 20) and then follow the steps below. The factory default setting for the color mode is "COLOR". To change the color mode, follow these steps. 1 Press the [COLOR MODE] key. DATA COPY EXPOSURE PAPER ZOO SCAN COLOR MODE RESOLUTION ADDR FAX PROGRAM RESOLUTION ADDR The color mode selection screen appears. COLOR MODE COLOR GRAY B/W COLOR : Select this mode for color originals. GRAY : Select this mode for a black and white photograph or when a monochrome image is needed. B/W : Select this mode when you wish to scan a photo in monochrome or when you wish to make text clearer. 3 Press the [OK] key. 2 Select the color mode with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN The selected mode is highlighted. COLOR MODE COLOR GRAY B/W BACK OK You will return to the base screen and the selected mode will appear in the color mode display. GHI Two-sided scanning is not possible when Note "COLOR MODE" is set to "COLOR" or "GRAY". SELECTING THE RESOLUTION The scanning resolution can be selected. After selecting scan mode and placing the original (steps 1 to 3 on page 20), perform the procedure below. The factory default setting for the resolution is "150dpi" (e-mail/FTP mode). If you need to change the resolution, follow these steps. 1 Press the [RESOLUTION] key. COPY EXPOSURE PAPER ZOOM AUTO SCAN COLOR MODE RESOLUTION ADDRESS FORM FAX PROGRAM RESOLUTION ADDRESS BROADC The resolution selection screen appears. RESOLUTION 100dpi 150dpi 200dpi 300dpi 2 Select the resolution with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN The selected resolution is highlighted. RESOLUTION 100dpi 150dpi 200dpi 300dpi 27