Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 144

SELECTING RESOLUTION AND EXPOSURE SETTINGS The resolution and exposure can be adjusted to match the size and darkness of text on the original, or for an original such as a photograph. To change the settings, follow the steps below after selecting fax mode and placing the original. (Page 13) 1 Press the [RESOLUTION] key. 3 Press the [OK] key. PAPER COPY AUT COPY EXPOSURE SELECT RATIO IMAG SCAN COLOUR MODE RESOLUTION ADDRESS FORM FAX PROGRAM BROADC The resolution selection screen will appear. RESOLUTION STANDARD FINE SUPER FINE AUTO 2 Select the resolution with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION The selected resolution is highlighted. RESOLUTION STANDARD FINE SUPER FINE AUTO STANDARD FINE SUPER FINE ULTRA FINE Use this setting for originals with normal-size text (like the text in this manual). Use this setting for originals with small letters or detailed drawings. The original will be scanned at twice the resolution of Standard. Use this setting for originals with intricate drawings or diagrams. A higher-quality image will be produced than with the Fine setting. Use this setting for originals with intricate drawings or diagrams. This setting gives the best image quality. However, transmission will take longer than with the other settings. (FINE/HALF‫ޓ‬ TONE) (S-FINE/HALF TONE) (U-FINE/HALF TONE) Use halftone if your original is a photograph or has gradations of colour (such as a colour original). This setting will produce a clearer image than "FINE", "SUPER FINE", or "ULTRA FINE" used alone. When halftone is selected, transmission will take longer. To set the exposure next, press the [ ] or [ ] key and go to step 4. RESOLUTION STANDARD FINE SUPER FINE When the [ ] or [ ] key is pressed, the exposure display changes from "AUTO" to a 5-step display. BACK OK You will return to the base screen and the selected resolution will appear in the resolution display. GHI 4 1 Select the desired exposure with the [ ] or [ ] key. RESOLUTION STANDARD FINE SUPER FINE • To select a light setting for a dark original such as a newspaper, press the [ ] key to move the setting toward ( ). • To select a dark setting for a light original such as writing in pencil or faint colour text, press the [ ] key to move the setting toward ( ) . • When the exposure setting reaches the left side or the right side, pressing the [ ] or [ ] key changes the exposure display from the 5-step display to "AUTO". 5 Press the [OK] key. OK You will return to the base screen and the selected exposure will appear in the exposure display. Note • The default resolution setting is "STANDARD" and the default exposure setting is "AUTO". The default settings for the resolution and exposure can be changed in the key operator programs. (See "RES. CON. SET" on page 100.) When using the document glass to scan multiple original pages, the exposure setting can be changed each time you change pages. When using the SPF, the resolution and exposure settings cannot be changed once scanning has begun. • Even if you send a fax using a high resolution setting such as "FINE", "SUPER FINE", or "ULTRA FINE", some receiving fax machines may print the fax at a lower resolution. • To cancel a resolution or exposure selection, press the [CA] key. 15