D-Link 3324SRi Reference Manual - Page 104
show fdb, Total Entries
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#show multicast_fdb Command: show multicast_fdb VLAN Name MAC Address Egress Ports Mode : default : 01-00-5E-00-00-00 : 1:1-1:5,1:26,2:26 : Static Total Entries : 1 DGS-3324SRi:4# show fdb Purpose Syntax Description Parameters Restrictions Used to display the current unicast MAC address forwarding database. show fdb {port | vlan | mac_address | static | aging_time} This command will display the current contents of the Switch's forwarding database. port − The port number corresponding to the MAC destination address. The Switch will always forward traffic to the specified device through this port. The port is specified by listing the switch number and the port number on that switch, separated by a colon. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. − The name of the VLAN on which the MAC address resides. − The MAC address that is present in the forwarding database table. static − Displays the static MAC address entries. aging_time − Displays the aging time for the MAC address forwarding database. None. Example usage: To display unicast MAC address table: 96