D-Link 3324SRi Reference Manual - Page 248

xStack Gigabit Layer 3 Switch Command Line Interface Manual config box_id Purpose Syntax Description Parameters Restrictions Used to configure box ID. Users can use this command to reassign box IDs. config box_id {current_box_id new_box_id [AUTO | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12]} This command will assign box IDs to switches in a stack. current_box_id - Identifies the Switch being configured. Range is 1-12. new_box_id - The new ID being assigned to the Switch (box). Range is 1-12. • auto - Allows the box ID to be assigned automatically. Administrator privileges are needed to issue this command. Usage Example: To change a box ID: DGS-3324SRi:4#config box_id current_box_id 1 new_box_id 2 Command: config box_id current_box_id 1 new_box_id 2 Success. DGS-3324SRi:4# config box_type Purpose Used to configure box type. Syntax config box_type {current_box_id type [DGS3324SR | DXS-3350SR | DXS-3326GSR | BOX_NOTEXIST]} Description This command will pre-assign the box type of switches in a stack. Parameters current_box_id - Identifies the Switch being configured. Range is 1-12. type - Enter the type of switch to be configured. The user may choose between the following: • DGS-3324SR - Name of a xStack switch that can be set in the stack. • DXS-3350SR - Name of a xStack switch that can be set in the stack. • DXS-3326GSR - Name of a xStack switch that can be set in the stack. • BOX_NOTEXIST - Identifies a switch which may be added to the stack in future. A box_type may be assigned to this box, in effect to pre-configure it, as it is added to the stack. If box_type is not assigned, box is identified as BOX_NOTEXIST and box type will be identified automatically. Restrictions Only administrator-level users can issue this command. 240