D-Link 3324SRi Reference Manual - Page 32
reboot, reset, DGS-3324SRi:4#reboot
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual NOTE: The DGS-3324SRi does not support a change in box mode from Auto to Static. reboot Purpose Syntax Description Parameters Restrictions Used to restart the Switch. reboot This command is used to restart the Switch. None. None. Example usage: To restart the Switch: DGS-3324SRi:4#reboot Command: reboot Are you sure want to proceed with the system reboot? (y/n) Please wait, the Switch is rebooting... reset Purpose Syntax Description Parameters Restrictions Used to reset the Switch to the factory default settings. reset {[config | system]} This command is used to restore the Switch's configuration to the default settings assigned from the factory. config − If the keyword 'config' is specified, all of the factory default settings are restored on the Switch including the IP address, user accounts, and the Switch history log. The Switch will not save or reboot. system − If the keyword 'system' is specified all of the factory default settings are restored on the Switch. The Switch will save and reboot after the settings are changed to default. Rebooting will clear all entries in the Forwarding Data Base. If no parameter is specified, the Switch's current IP address, user accounts, and the Switch history log are not changed. All other parameters are restored to the factory default settings. The Switch will not save or reboot. Only administrator-level users can issue this command. Example usage: To restore all of the Switch's parameters to their default values: DGS-3324SRi:4#reset config Command: reset config 24