D-Link 3324SRi Reference Manual - Page 270
delete arpentry, config arp_aging time, show arpentry, onfig arp_aging time <value 0-65535>
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual delete arpentry Parameters Restrictions − The IP address of the end node or station. all − Deletes all ARP entries. Only administrator-level users can issue this command. Example Usage: To delete an entry of IP address 10.48.74.121 from the ARP table: DGS-3324SRi:4#delete arpentry 10.48.74.121 Command: delete arpentry 10.48.74.121 Success. DGS-3324SRi:4# config arp_aging time Purpose Syntax Description Parameters Restrictions Used to configure the age-out timer for ARP table entries on the Switch. config arp_aging time This command sets the maximum amount of time, in minutes, that an ARP entry can remain in the Switch's ARP table, without being accessed, before it is dropped from the table. time − The ARP age-out time, in minutes. The value may be set in the range of 0-65535 minutes with a default setting of 20 minutes. Only administrator-level users can issue this command. Example Usage: To configure ARP aging time: DGS-3324SRi:4#config arp_aging time 30 Command: config arp_aging time 30 Success. DGS-3324SRi:4# show arpentry Purpose Syntax Description Used to display the ARP table. show arpentry {ipif | ipaddress | static} This command is used to display the current contents of the S it h' ARP t bl 262