D-Link 3324SRi Reference Manual - Page 116

xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4# config scheduling 6 max_packet 0 Command: config scheduling 6 max_packet 0 Success. DGS-3324SRi:4# show scheduling Purpose Syntax Description Parameters Restrictions Used to display the currently configured traffic scheduling on the Switch. show scheduling The show scheduling command displays the current configuration for the maximum number of packets (max_packets) assigned to the seven hardware priority classes on the Switch. At this value, it will empty the seven hardware priority classes in order, from the highest priority (queue 6) to the lowest priority (queue 0). None. None. Example usage: To display the current scheduling configuration with Class 1 as the strict priority class of a Combination Queue: DGS-3324SRi:4# show scheduling Command: show scheduling QOS Output Scheduling Class-0 Class-1 Class-2 Class-3 Class-4 Class-5 Class-6 MAX. Packets 1 0 3 4 5 6 7 DGS-3324SRi:4# config 802.1p user_priority Purpose Used to map the 802.1p user priority tags of an incoming packet to one of the seven hardware priority classes of service available on the Switch. 108