D-Link 3324SRi Reference Manual - Page 158

xStack Gigabit Layer 3 Switch Command Line Interface Manual config router_ports_forbidden switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Restrictions Only administrator-level users can issue this command. Example usage: To set up forbidden router ports: DGS-3324SRi:4#config router_ports_forbidden default add 2:1-2:10 Command: config router_ports_forbidden default add 2:1-2:10 Success. DGS-3324SRi:4# show router_ports Purpose Syntax Description Parameters Restrictions Used to display the currently configured router ports on the Switch. show router_ports {vlan } {static | dynamic | forbidden} This command will display the router ports currently configured on the Switch. vlan − The name of the VLAN on which the router port resides. static − Displays router ports that have been statically configured. dynamic − Displays router ports that have been dynamically configured. forbidden - Displays router ports that have been labeled as forbidden. None. Example usage: To display the router ports. 150