D-Link 3324SRi Reference Manual - Page 321
create ospf area, delete ospf area <area_id>
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual create ospf area Purpose Syntax Description Parameters Restrictions Used to configure OSPF area settings. create ospf area type [normal | stub {stub_summary [enable | disable] | metric }] This command is used to create an OSPF area and configure its settings. − The OSPF area ID. The user may enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. type [normal | stub] − The OSPF area mode of operation − stub or normal. stub_summary [enable | disable] − Enables or disables the OSPF area to import summary LSA advertisements. metric − The OSPF area cost between 0 and 65535. 0 denotes that the value will be automatically assigned. The default setting is 0. Only administrator-level users can issue this command. Usage Example: To create an OSPF area: DGS-3324SRi:4#create ospf area 10.48.74.122 type normal Command: create ospf area 10.48.74.122 type normal Success. DGS-3324SRi:4# delete ospf area Purpose Syntax Description Parameters Restrictions Used to delete an OSPF area. delete ospf area This command is used to delete an OSPF area. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Only administrator-level users can issue this command. Usage Example: To delete an OSPF area: 313