D-Link 3324SRi Reference Manual - Page 19
Basic Switch Commands, Command, Parameters - login
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 4 BASIC SWITCH COMMANDS The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create account config account show account delete account show config show session show switch show switch_mode show device status show module_info show serial_port config serial_port enable clipaging disable clipaging enable telnet disable telnet enable web disable web save reboot reset login logout [admin | user] [current_config | config_in_NVRAM] {baud_rate [115200] auto_logout [never | 2_minutes | 5_minutes | 10_minutes | 15_minutes]} [log | all] {[config | system]} Each command is listed, in detail, in the following sections. create account Purpose Syntax Description Used to create user accounts. create [admin | user] The create account command is used to create user accounts that consist of a username of 1 to 15 characters and a password of 0 to 15 characters. Up to 8 user accounts can be created. 11
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/19.png)