D-Link 3324SRi Reference Manual - Page 220
config radius delete, config radius, DGS-3324SRi:4#config radius delete 1
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config radius delete Purpose Syntax Description Parameters Restrictions Used to delete a previously entered RADIUS server configuration. config radius delete The config radius delete command is used to delete a previously entered RADIUS server configuration. − A number identifying the current set of RADIUS server settings delete. Up to 3 groups of RADIUS server settings can be entered on the Switch. Only administrator-level users can issue this command. Example usage: To delete previously configured RADIUS server communication settings: DGS-3324SRi:4#config radius delete 1 Command: config radius delete 1 Success. DGS-3324SRi:4# config radius Purpose Syntax Description Parameters Restrictions Example usage: Used to configure the Switch's RADIUS settings. config radius {ipaddress | key | auth_port | acct_port } The config radius command is used to configure the Switch's RADIUS settings. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. ipaddress − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. 212
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/220.png)