D-Link 3324SRi Reference Manual - Page 322
config ospf area, show ospf area, Command: delete ospf area 10.48.74.122
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#delete ospf area 10.48.74.122 Command: delete ospf area 10.48.74.122 Success. DGS-3324SRi:4# config ospf area Purpose Syntax Description Parameters Restrictions Used to configure an OSPF area's settings. config ospf area type [normal | stub {stub_summary [enable | disable] | metric }] This command is used to configure an OSPF area's settings. − The OSPF area ID. The user may enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. type [normal | stub] − Allows the specification of the OSPF mode of operation − stub or normal. stub_summary [enable | disable] − Allows the OSPF area import of LSA advertisements to be enabled or disabled. metric − The OSPF area stub default cost. Only administrator-level users can issue this command. Usage Example To configure an OSPF area's settings: DGS-3324SRi:4#config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Command: config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Success. DGS-3324SRi:4# show ospf area Purpose Syntax Description Parameters Restrictions Used to display an OSPF area's configuration. show ospf area {} This command will display the current OSPF area configuration. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. None. 314
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/322.png)