D-Link 3324SRi Reference Manual - Page 40
Network Management (SNMP) Commands
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 7 NETWORK MANAGEMENT (SNMP) COMMANDS The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. The xStack family of switches support the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which version of the SNMP you want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided between the management station and the network device. The following table lists the security features of the three SNMP versions: SNMP Version Authentication Method Description v1 Community String Community String is used for authentication − NoAuthNoPriv v2c Community String Community String is used for authentication − NoAuthNoPriv v3 Username Username is used for authentication − NoAuthNoPriv v3 MD5 or SHA Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthNoPriv v3 MD5 DES or SHA DES Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthPriv. DES 56-bit encryption is added based on the CBC-DES (DES-56) standard Each command is listed, in detail, in the following sections. Command create snmp user delete snmp user show snmp user create snmp view delete snmp view show snmp view create snmp community delete snmp community show snmp community config snmp engineID show snmp engineID create snmp group Parameters create snmp user {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} view_type [included | excluded] [all | oid] view [read_only | read_write] {v1 | v2c |v3 [noauth_nopriv | auth_nopriv | auth priv ]} {read view | write view 32
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/40.png)