D-Link 3324SRi Reference Manual - Page 279

xStack Gigabit Layer 3 Switch Command Line Interface Manual show vrrp Purpose Syntax Description Parameters Restrictions To view the VRRP settings set on the Switch. show vrrp ipif vrid This command is used to view current VRRP settings of the VRRP Operations table. ipif - Enter the name of a previously configured IP interface for which to view the VRRP settings. This IP interface must be assigned to a VLAN on the Switch. vrid - Enter the VRRP ID of a VRRP entry for which to view these settings. Only administrator-level users can issue this command. Example Usage: To view the global VRRP settings currently implemented on the Switch (VRRP Enabled): DGS-3324SRi:4#show vrrp Command: show vrrp Global VRRP :Enabled Non-owner response PING : Disabled Interface Name Authentication type : System : No Authentication VRID : 2 Virtual IP Address : 10.53.13.3 Virtual MAC Address : 00-00-5E-00-01-02 Virtual Router State : Master State : Enabled Priority : 255 Master IP Address : 10.53.13.3 Critical IP Address : 0.0.0.0 Checking Critical IP : Disabled Advertisement Interval : 1 secs Preempt Mode : True Virtual Router Up Time : 2754089 centi-secs Total Entries : 1 DGS-3324SRi:4# delete vrrp Purpose Syntax Description Parameters Used to delete a vrrp entry from the switch. delete vrrp {vrid ipif } This command is used to remove a VRRP router running on a local device. vrid - Enter the VRRP ID of the virtual router to be d l t d N t t i thi t ill d l t ll VRRP t i 271